Edge lengths by class
Totals
| Class | Length | Line style | Confidence |
|---|---|---|---|
| Eaves | 93 ft | solid | High confidence |
| Ridges | 65 ft | solid | High confidence |
| Valleys | 26 ft | solid | Medium confidence |
| Rakes | 139 ft | solid | Medium confidence |
| Flashing | 29 ft | dashed | — |
| Class | Length | Line style | Confidence |
|---|---|---|---|
| Eaves | 93 ft | solid | High confidence |
| Ridges | 65 ft | solid | High confidence |
| Valleys | 26 ft | solid | Medium confidence |
| Rakes | 139 ft | solid | Medium confidence |
| Flashing | 29 ft | dashed | — |
8 uncertain, disconnected or small interior segments (76 ft) are excluded from the main plan. Their quantities remain in the measurement tables. Missing or unresolved roof joints still require verification.
| Key | Building | Facets | Surfaces | Roof sqft |
|---|---|---|---|---|
| S1 | Structure 1 | 1–6 | 6 | 2,014 |
Facet numbers identify surfaces within this saved report. Separate fitted patches can belong to one physical roof face; the count does not establish architectural facet count. Curved roof fragments are grouped as a curved surface.
S1 location key · Part 1 of 1. Each number marks one facet; the row with the same number below lists its measurements. Cyan dotted leaders locate small or crowded facets. All markers match the facet numbers below.
| Facet | Pitch | Faces | Plan sqft | Roof sqft | Eave ft | Rake ft | Ridge ft | Hip ft | Valley ft | Basis |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 6/12 | N | 855.2 | 960.6 | 54 | 42 | 55 | — | — | Elevation fit |
| 2 | 6/12 | S | 142.5 | 160.2 | 5 | 22 | 14 | — | 9 | Elevation fit |
| 3 | 7/12 | S | 141.1 | 161.4 | 11 | 13 | 14 | — | — | Elevation fit |
| 4 | 6/12 | E | 129.6 | 145.7 | 12 | 17 | 9 | — | 11 | Elevation fit |
| 5 | 6/12 | S | 426.3 | 476.2 | 11 | 33 | 28 | — | 17 | Elevation fit |
| 6 | 6/12 | W | 46.5 | 51.9 | — | 13 | 9 | — | 15 | Elevation fit |
| This page only | 1,741.2 | 1,956.0 | Before waste. Shared lines are on both facets; use the building totals for ordering. | |||||||
Plan is horizontal area; roof is sloped surface area. Low slope is a pitch category, not a material identification. * Inferred geometry needs verification. Elevation fit describes the source, not field certification. Curved surfaces use variable pitch. Eave and rake are the facet's own edges (where one facet steps up from another, the upper facet's). Ridge, hip and valley lines are shared, so each one appears on both facets it joins; facet lengths do not add up to the building totals.
This saved report does not include a solar-production model. It may predate solar capture or have been generated without available solar data.
Panel capacity, annual production and financial returns have not been estimated. Missing data is not a finding that the roof is unsuitable for solar.
Request a current solar feasibility assessment for this address. Confirm the intended building, available roof area, shading, structural capacity and electrical requirements with a qualified solar professional.
Source: Includes solar data from Google
Includes data from Google Maps
Aerial-only report. No inspection photo review is included. On-site photos are optional.
This report is generated by the SatRoofs geometry engine from a high-resolution aerial surface model. The roof is reconstructed as individual planes, the planes are intersected to recover every edge, and each edge is classified by how water moves across it — the same logic a measurement analyst applies by hand, computed for every line. Areas are true sloped areas; lengths are true 3D lengths along the roof surface.
3D overview unavailable. This saved report does not retain a roof surface mesh. Regenerate the measurement to include a 3D view.
Every edge carries an individual confidence grade based on the strength of the surface evidence beneath it. Lengths marked medium or low sit under tree cover, imagery seams, or unusual geometry — verify on site before ordering from them alone.